Celestron NexImage Solar System Imager User Guide - Page 8

Processing

Get Celestron NexImage Solar System Imager PDF manuals and user guides View all Celestron NexImage Solar System Imager manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

7. Set the "start" quality filter to 10. This will position the two green lines so that one is to the left of the blue line and one is to the right of the blue line. Setting the band "width" filter to 9 defines the area under the Registration Properties graph that is calculated as a proportion of the total area below the graph. Ideally one of the vertical green lines should lie on the lower part of the red curve while the other is positioned where the red-curve nearly touches the bottom. 7 8 8. Press Align & Stack and Registax will automatically start the alignment process. During this stage the program determines how much the object is misaligned compared to the reference for every frame in the AVI file. Next is the optimization process where only frames with good image quality are optimized further. This is a more precise way of aligning the images. Once all the frames are aligned and stacked you will automatically go to the Processing Page. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
7.
Set the "start" quality filter to 10. This will position the two green lines so
that one is to the left of the blue line and one is to the right of the blue line.
Setting the band “width” filter to 9 defines the area under the Registration
Properties graph that is calculated as a proportion of the total area below
the graph. Ideally one of the vertical green lines should lie on the lower part
of the red curve while the other is positioned where the red-curve nearly
touches the bottom.
8.
Press Align & Stack and Registax will automatically start the alignment
process. During this stage the program determines how much the object is
misaligned compared to the reference for every frame in the AVI file. Next
is the optimization process where only frames with good image quality are
optimized further. This is a more precise way of aligning the images. Once
all the frames are aligned and stacked you will automatically go to the
Processing Page.
7
7
8