Celestron NexStar 90SLT Computerized Telescope NexStar SLT Series MAKs Manual - Page 27

Observing the Moon, Lunar Observing Hints, Observing the Planets, Planetary Observing Hints,

Page 27 highlights

With your telescope set up, you are ready to use it for observing. This section covers visual observing hints for both solar system and deep sky objects as well as general observing conditions which will affect your ability to observe. Observing the Moon Often, it is tempting to look at the Moon when it is full. At this time, the face we see is fully illuminated and its light can be overpowering. In addition, little or no contrast can be seen during this phase. One of the best times to observe the Moon is during its partial phases (around the time of first or third quarter). Long shadows reveal a great amount of detail on the lunar surface. At low power you will be able to see most of the lunar disk at one time. Change to higher power (magnification) to focus in on a smaller area. Choose the lunar tracking rate from the NexStar's MENU tracking rate options to keep the moon centered in the eyepiece even at high magnifications. Lunar Observing Hints  To increase contrast and bring out detail on the lunar surface, use eyepiece filters. A yellow filter works well at improving contrast while a neutral density or polarizing filter will reduce overall surface brightness and glare. Observing the Planets Other fascinating targets include the five naked eye planets. You can see Venus go through its lunar-like phases. Mars can reveal a host of surface detail and one, if not both, of its polar caps. You will be able to see the cloud belts of Jupiter and the great Red Spot (if it is visible at the time you are observing). In addition, you will also be able to see the moons of Jupiter as they orbit the giant planet. Saturn, with its beautiful rings, is easily visible at moderate power. Planetary Observing Hints  Remember that atmospheric conditions are usually the limiting factor on how much planetary detail will be visible. So, avoid observing the planets when they are low on the horizon or when they are directly over a source of radiating heat, such as a rooftop or chimney. See the "Seeing Conditions" section later in this section.  To increase contrast and bring out detail on the planetary surface, try using Celestron eyepiece filters. Observing the Sun Although overlooked by many amateur astronomers, solar observation is both rewarding and fun. However, because the Sun is so bright, special precautions must be taken when observing our star so as not to damage your eyes or your telescope. Never project an image of the Sun through the telescope. Tremendous heat build-up may result inside the optical tube. This can damage the telescope and/or any accessories attached to the telescope. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

27
With your telescope set up, you are ready to use it for observing.
This section covers visual observing hints for
both solar system and deep sky objects as well as general observing conditions which will affect your ability to
observe.
Observing the Moon
Often, it is tempting to look at the Moon when it is full. At this
time, the face we see is fully illuminated and its light can be
overpowering.
In addition, little or no contrast can be seen
during this phase.
One of the best times to observe the Moon is during its partial
phases (around the time of first or third quarter).
Long shadows
reveal a great amount of detail on the lunar surface.
At low
power you will be able to see most of the lunar disk at one time.
Change to higher power (magnification) to focus in on a smaller
area.
Choose the
lunar
tracking rate from the NexStar's
MENU
tracking rate options to keep the moon centered in the eyepiece
even at high magnifications.
Lunar Observing Hints
To increase contrast and bring out detail on the lunar surface, use eyepiece filters.
A yellow filter works
well at improving contrast while a neutral density or polarizing filter will reduce overall surface brightness
and glare.
Observing the Planets
Other fascinating targets include the five naked eye planets.
You can see Venus
go through its lunar-like phases.
Mars can reveal a host of surface detail and
one, if not both, of its polar caps.
You will be able to see the cloud belts of
Jupiter and the great Red Spot (if it is visible at the time you are observing).
In
addition, you will also be able to see the moons of Jupiter as they orbit the giant
planet.
Saturn, with its beautiful rings, is easily visible at moderate power.
Planetary Observing Hints
Remember that atmospheric conditions are usually the limiting factor on how much planetary detail will be
visible.
So, avoid observing the planets when
they are low on the horizon or when they are directly over a
source of radiating heat, such as a rooftop or chimney.
See the "
Seeing Conditions
" section later in this
section.
To increase contrast and bring out detail on the planetary surface, try using Celestron eyepiece filters.
Observing the Sun
Although overlooked by many amateur astronomers, solar observation is both rewarding and fun.
However,
because the Sun is so bright, special precautions must be taken when observing our star so as not to damage your
eyes or your telescope.
Never project an image of the Sun through the telescope. Tremendous heat build-up may result inside the
optical tube. This can damage the telescope and/or any accessories attached to the telescope.