Celestron TrekGuide Lite Blue TrekGuide Lite Manual - Page 8
Compass Sensor Calibration
View all Celestron TrekGuide Lite Blue manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Compass Sensor Calibration The compass should be calibrated before use AND when the batteries are replaced. • In COMPASS mode hold the "COMPASS" button for 3 seconds to enter the compass sensor calibration mode, then press the "COMPASS" button to start the calibration. • Keep the unit in a level position or on top of a non-metallic table or desk. Reference the arrow showing in the LCD, rotate the compass clockwise for two full rotations slowly: • When finished, the LCD will display "OK" if the calibration is successful or display "Fail" if unsuccessful 8 I ENGLISH
8
I
ENGLISH
COMPASS SENSOR CALIBRATION
•
In COMPASS mode hold the
“COMPASS” button for 3 seconds
to enter the compass sensor
calibration mode, then press the
“COMPASS” button to start the
calibration.
•
Keep the unit in a level position or
on top of a non-metallic table or
desk. Reference the arrow showing
in the LCD, rotate the compass
clockwise for two full rotations
slowly:
•
When finished, the LCD will display
“OK” if the calibration is successful
or display “Fail” if unsuccessful
The compass should be calibrated before use AND when the batteries are
replaced.