Chamberlain WD962KEV WD962KEV Manual - Page 39
Using the Smart Control Panel continued, TIMER-TO-CLOSE TTC, BATTERY BACKUP, SMART CONTROL PANEL MENU
View all Chamberlain WD962KEV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Operation Using the Smart Control Panel (continued) Light Feature The lights will turn on when someone enters through the open garage door and the safety reversing sensor infrared beam is broken. If using the garage door opener light as a work light, turn the light on using the light button on the wall control or the light will turn off if you are beyond the range of the sensor. LOCK The LOCK feature is designed to prevent activation of the garage door opener from remote controls while still allowing activation from the door control and keyless entry. This feature is useful for added peace of mind when the home is empty (i.e. vacation). When the Lock feature is on, your remote controls have been disabled and a message will display on the door control (Figure 1). TIMER-TO-CLOSE (TTC) DO NOT enable TTC if operating a one-piece door. TTC can be set to automatically close your garage door from the fully open position after a specified period of time (1, 5, 10 minute intervals or a custom setting up to 99 minutes). The screen on the door control can display the status of the TTC. Once the TTC has been set and the door is open, the selected close interval will be displayed on the screen and toggle between the time and TTC message. When the TTC is on, a message will display on the door control screen (Figure 2). To temporarily suspend the TTC feature press and release the HOLD button. Press REL button to resume normal TTC operation (Figure 3). BATTERY BACKUP If your garage door opener has a battery backup one of two messages will display on the door control if there is a problem with the battery (Figures 4 and 5). Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 SMART CONTROL PANEL MENU The features on the door control can be programmed through a series of menus on the screen and the navigation buttons. Screen The screen will display the time, temperature, and current battery charge (if applicable) until the menu button is pressed, and then it will display the menu options. If there is a problem with the garage door opener the screen will display the Diagnostic Code. Navigation Buttons Use the navigation buttons to make selections and program features. FEATURES MENU Press the navigation button below "MENU" to view the Features menu. Set the time, choose 12 or 24 hour clock and show/hide clock. Set the Timer-to-Close feature off/on and set the time interval before door closes. Enable/disable lock. Add remote controls, MyQ® devices, an extra remote button to control your garage door opener lights, or a keyless entry. SETTINGS MENU Press the navigation button below the down arrow till you see TEMPERATURE to view the Settings menu. Display the temperature in Fahrenheit or Celsius and show/hide the temperature. Select a language. Set duration for garage door opener light to stay on after operation, selectable range of 1-1/2 to 4-1/2 minutes. Turn the Motion sensor off/on, and turn the entry light feature off/on. Adjust the contrast of the screen. 38