Cisco 1811 User Instructions - Page 4

CONFIGURE YOUR ROUTER Figure 2 SDP Authentication If you're using DHCP, to initiate the SDP process, go to the PC which is connected to the CVO router and open a browser window. Then type in the address bar: http://10.10.10.1/ezsdd/welcome. You will be prompted to authenticate, and you must use username/password cisco/cisco. You will see the screen shown in Figure 3 while the router prepares for the rest of the SDP process. Figure 3 SDP Screen Step 3 Securely download the CVO router configuration. When the screen refreshes you will notice a field for site URL. Enter the URL provided by your network administrator (Figure 4). Cisco Virtual Office - End User Instructions for Cisco 1811 Router Set Up at Home or Small Office 4 78-18859-01