Cisco 7604 Processor Guide - Page 25
p1q4t/1p2q2t, 1p3q8t/1p3q8t, QoS port architecture Rx/Tx - gbic
View all Cisco 7604 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 2 Route Switch Processors and Supervisor Engines Overview OL-10100-11 Table 2-1 Route Switch Processor and Supervisor Engine Configurations (continued) Product Number Description WS-SUP720-3BXL • Two Ethernet uplink ports: port 1 supports a 1-Gbps SFP module; port 2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45 connector • Integrated 720-Gbps switch fabric • PFC3BXL and MSFC3 with 2-MB NVRAM, 1-GB DRAM, and 64-MB bootflash; high-capacity PFC3BXL allows routing and forwarding processes to be offloaded from the supervisor engine to the PFC (see note below) • Two CompactFlash Type II slots • Requires larger power supplies and a high-speed fan tray • QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t Note A CompactFlash (CF) adapter with 512-MB bootdisk is available for Sup720 modules in Release 12.2(18)SXF and later releases. Use the Cisco part number CF-ADAPTER= for ordering. Supervisor Engine 32 WS-SUP32-GE-3B • Nine Gigabit Ethernet uplink ports: eight SFP modules and one RJ-45 10/100/1000-Mbps connector • Integrated 32-Gbps switch fabric • PFC3B and MSFC2 daughter cards (see notes below) • QoS port architecture (Rx/Tx): 1p3q8t/1p3q8t WS-SUP32-10GE-3B • Two 10-Gigabit Ethernet ports (XENPAKs) and one 10/100/1000-Mbps connector • Integrated 32-Gbps switch fabric • PFC3B and MSFC2 daughter cards (see notes below) • QoS port architecture (Rx/Tx): 1p3q8t/1p3q8t Note To run Release 12.2SRB, the Sup32 requires a minimum of 512-MB DRAM. Note A CF adapter with 512-MB bootdisk is available for Sup32 modules in Release 12.2(18)SXF and later releases. Use the Cisco part number CF-ADAPTER= for ordering. Supervisor Engine 2 WS-X6K-S2-MSFC2 • Two dual-port 1000BASE-X GBIC uplinks, 16-MB bootflash, 128-MB DRAM on supervisor engine and 128 MB on MSFC2 • PFC2 and MSFC2 • Fabric enabled to support optional switch fabric module (SFM2) • QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t WS-X6K-S2U-MSFC2 • Two dual-port 1000BASE-X GBIC uplinks, 32-MB bootflash, 256-MB DRAM on supervisor engine and 256 MB on MSFC2 • PFC2 and MSFC2 • Fabric enabled to support optional SFM2 • QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide 2-7