Cisco 7961G Administration Guide - Page 176

Status Menu Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone Table 7-2 Status Messages on the Cisco Unified IP Phone (continued) Message CTL Installed CTL update failed DHCP timeout Disabled Description Possible Explanation and Action A certificate trust list (CTL) file is installed in the phone. None. This message is informational only. For more information about the CTL file, refer to Cisco Unified CallManager Security Guide. The phone could not update its Problem with the CTL file on the TFTP certificate trust list (CTL) file. server. For more information, refer to Cisco Unified CallManager Security Guide. DHCP server did not respond. • Network is busy-The errors should resolve themselves when the network load reduces. • No network connectivity between the DHCP server and the phone-Verify the network connections. • DHCP server is down-Check configuration of DHCP server. • Errors persist-Consider assigning a static IP address. See the "Network Configuration Menu" section on page 4-7 for details on assigning a static IP address. 802.1X Authentication is disabled on the phone. You can enable 802.1X using the Settings > Security Configuration > 802.1X Authentication option on the phone. For more information, see the "802.1X Authentication and Status" section on page 4-34. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager 7-6 OL-11528-01