Cisco 7961G Administration Guide - Page 78

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Using Cisco Unified IP Phones with Different Protocols Step 2 Step 3 If you are not using DHCP in your network, configure the network parameters for the phone. See the "Configuring Startup Network Settings" section on page 3-14. Power cycle the phone. Converting an In-Use Phone from SCCP to SIP You can use the Bulk Administration Tool (BAT) to convert a phone that is in use in your network from SCCP to SIP. To access BAT from Cisco Unified CallManager Administration, choose Bulk Administration > Phones > Migrate Phones > SCCP to SIP. For detailed information, refer to Cisco Unified CallManager Bulk Administration Guide. Converting an In-Use Phone from SIP to SCCP To convert a phone that is in use in your network from SIP to SCCP, perform these steps. For more information, Cisco Unified CallManager Administration Guide. Procedure Step 1 Step 2 Step 3 In Cisco Unified CallManager Administration, delete the existing SIP phone from the Cisco Unified CallManager database. In Cisco Unified CallManager Administration, create the phone as an SCCP phone. Power cycle the phone. 2-18 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager OL-11528-01