Cisco 7965G Administration Guide - Page 54
Network Requirements, Cisco Unified Communications Manager Configuration, Safety
UPC - 882658140464
View all Cisco 7965G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Before You Begin Chapter 3 Setting Up the Cisco Unified IP Phone Network Requirements For the Cisco Unified IP Phone 7965G and 7945G to successfully operate as a Cisco Unified IP Phone endpoint in your network, your network must meet these requirements: • Working Voice over IP (VoIP) network: - VoIP configured on your Cisco routers and gateways - Cisco Unified Communications Manager Release 6.0 or higher installed in your network and configured to handle call processing • IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask Note The Cisco Unified IP Phone displays the date and time from Cisco Unified Communications Manager. If the Cisco Unified Communications Manager server is located in a different time zone than the phones, the phones will not display the correct local time. Cisco Unified Communications Manager Configuration The Cisco Unified IP Phone requires Cisco Unified Communications Manager to handle call processing. Refer to Cisco Unified Communications Manager Administration Guide or to context-sensitive help in the Cisco Unified Communications Manager application to ensure that Cisco Unified Communications Manager is set up properly to manage the phone and to properly route and process calls. If you plan to use auto-registration, verify that it is enabled and properly configured in Cisco Unified Communications Manager before connecting any Cisco Unified IP Phone to the network. For information about enabling and configuring auto-registration, refer to Cisco Unified Communications Manager Administration Guide. Also, see the "Adding Phones to the Cisco Unified Communications Manager Database" section on page 2-8. You must use Cisco Unified Communications Manager to configure and assign telephony features to the Cisco Unified IP Phones. See the "Telephony Features Available for the Phone" section on page 5-2 for details. In Cisco Unified Communications Manager, you can add users to the database and associate them with specific phones. In this way, users gain access to web pages that allow them to configure items such as call forwarding, speed dialing, and voice messaging system options. See the "Adding Users to Cisco Unified Communications Manager" section on page 5-16 for details. Safety Review the following warnings before installing the Cisco Unified IP Phone 7965G and 7945G. To see translations of these warnings, refer to the Regulatory Compliance and Safety Information for the Cisco Unified IP Phone 7900 Series document that accompanied this device. Warning Read the installation instructions before you connect the system to its power source. Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 3-2 OL-14641-01