Cisco 8-10GBE-RF Hardware Installation Guide - Page 46
Problems During First Startup
View all Cisco 8-10GBE-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Problems During First Startup Chapter 3 Troubleshooting Problems During First Startup Table 3-1 lists problems that could occur after you turn on the power switch for the first time. Table 3-1 Problems During First Startup Symptom All LEDs, including OK LED, are off. Problem No power to router. Solutions Perform the following steps in the following order: • Make sure that the power switch is ON. • Make sure that all connections to and from the power supply are securely connected. • Make sure that the power outlet has power. • If the problem continues, the router might have a faulty power supply. Contact your Cisco reseller. Cisco 800 Series Routers Hardware Installation Guide 3-2 78-5373-04
3-2
Cisco 800 Series Routers Hardware Installation Guide
78-5373-04
Chapter 3
Troubleshooting
Problems During First Startup
Problems During First Startup
Table 3-1
lists problems that could occur after you turn on the power switch for the first time.
Table 3-1
Problems During First Startup
Symptom
Problem
Solutions
All LEDs,
including OK
LED, are off.
No power to
router.
Perform the following steps in the following order:
•
Make sure that the power switch is ON.
•
Make sure that all connections to and from the power
supply are securely connected.
•
Make sure that the power outlet has power.
•
If the problem continues, the router might have a faulty
power supply. Contact your Cisco reseller.