Cisco 851W Configuration Guide - Page 43
no shutdown, interface, ip nat, inside, outside, access-list, permit, Cisco IOS IP Command Reference
UPC - 746320958071
View all Cisco 851W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3 Configuring PPP over Ethernet with NAT Configure Network Address Translation Step 5 Command no shutdown Example: Router(config-if)# no shutdown Router(config-if)# Purpose Enables the configuration changes just made to the Ethernet interface. Step 6 exit Example: Router(config-if)# exit Router(config)# Exits configuration mode for the Fast Ethernet interface. Step 7 interface type number Example: Router(config)# interface fastethernet 4 Router(config-if)# Enters configuration mode for the Fast Ethernet WAN interface (FE4) to be the outside interface for NAT. Step 8 ip nat {inside | outside} Example: Router(config-if)# ip nat outside Router(config-if)# Step 9 no shutdown Example: Router(config-if)# no shutdown Router(config-if)# Identifies the specified WAN interface as the NAT outside interface. For details about this command and additional parameters that can be set, as well as information about enabling static translation, see the Cisco IOS IP Command Reference, Volume 1 of 4: Addressing and Services. Enables the configuration changes just made to the Ethernet interface. Step 10 exit Example: Router(config-if)# exit Router(config)# Exits configuration mode for the Fast Ethernet interface. Step 11 access-list access-list-number {deny | permit} source [source-wildcard] Example: Router(config)# access-list 1 permit 192.168.1.0 255.255.255.0 Defines a standard access list indicating which addresses need translation. Note All other addresses are implicitly denied. Note If you want to use NAT with a virtual-template interface, you must configure a loopback interface. See Chapter 1, "Basic Router Configuration," for information on configuring a loopback interface. OL-5332-01 Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide 3-7