Cisco AIR-LAP1142N-A-K9 Getting Started Guide - Page 19

Note Regarding LED status colors, it is expected that there will be small variations in color intensity and hue from unit to unit. This is within the normal range of the LED manufacturer's specifications and is not a defect. Table 2 shows the access point LED diagnostics for various conditions. Table 2 Access Point LED Diagnostic Messages Message Type Boot loader status sequence Status LED Blinking green Association status Green Blue Operating status Boot loader warnings Blinking blue Rapidly cycling through blue, green, red, and white Blinking red Blinking blue Red Blinking green Message Meaning DRAM memory test in progress DRAM memory test OK Board initialization in progress Initializing FLASH file system FLASH memory test OK Initializing Ethernet Ethernet OK Starting Cisco IOS Initialization successful Normal operating condition, but no wireless client associated Normal operating condition, at least one wireless client association Software upgrade in progress Access point location command invoked Ethernet link not operational Configuration recovery in progress (MODE button pushed for 2 to 3 seconds) Ethernet failure or image recovery (MODE button pushed for 20 to 30 seconds) Image recovery in progress (MODE button released) 19