Cisco AS5300 Configuration Guide - Page 2

Overview of Tasks Chapter 2 Configuring the Cisco AS5300 Network Access Server Table 2-1 Case Study Network Device Characteristics Site Hardware Cisco AS5300 Cisco AS5300 Cisco 1604 Cisco 766 WAN IP Address 10.1.254.1 255.255.255.0 Dialer Interface 10.1.2.0 255.255.255.0 Loopback Interface 10.1.254.4 255.255.255.0 10.1.254.3 255.255.255.0 Ethernet IP Address 10.1.1.10 255.255.255.0 10.1.4.1 255.255.255.0 10.1.3.1 255.255.255.0 Host Name/ Assigned Phone Number User Name 4085551234 hq-sanjose Directory number = 5125554433 Directory number = 5305558084 robo-austin soho-tahoe Username Password hq-sanjose-pw austin-pw tahoe-pw Note Be sure to use your own host names and passwords. For example, hq-sanjose, soho-tahoe, and tahoe-pw are for this case study only. Overview of Tasks Do the following tasks to configure the Cisco AS5300 network access server (NAS): Task 1-Setting Up Basic Configuration Parameters: Step 1-Verifying the Startup Configuration Step 2-Configuring the Host Name, Password, and Time Stamps Step 3-Configuring Local AAA Security Task 2-Setting Up Asynchronous Shell Services: Step 1-Configuring the Fast Ethernet 100BaseT Interface Step 2-Configuring the T1 Controllers Step 3-Configuring the Serial Channels to Let Modem Calls Come In Step 4-Configuring the Modems and Lines Step 5-Testing Async Shell Connections Task 3-Setting Up Asynchronous PPP services: Step 1-Setting Up IP Address Pools Step 2-Configuring the Group-Async Interface Step 3-Testing Async PPP Connections Task 4-Setting Up Synchronous PPP Services: Step 1-Configuring Dial-on-Demand Routing Step 2-Configuring Parameters for Remote LAN Sites Step 3-Configuring a Default Gateway (Backhaul) Routing Protocol Step 4-Confirming the Final Running Configuration Cisco IOS Dial Services Quick Configuration Guide 2-2