Cisco AS5300 Configuration Guide - Page 4
Step 2-Configuring the Host Name, Password, and Time Stamps - t1 card
View all Cisco AS5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Task 1-Setting Up Basic Configuration Parameters Chapter 2 Configuring the Cisco AS5300 Network Access Server 4 Channelized T1/PRI port(s) 128K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) 4096K bytes of processor board Boot flash (Read/Write) Cisco Internetwork Operating System Software IOS (tm) 5300 Software (C5300-JS-M), Version 12.0(5), Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Tue 07-Nov-99 15:26 by xxx 00:00:50: %MICA-5-BOARDWARE_RUNNING: Slot 2 is running boardware version 2.5.0.8 --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Would you like to enter the initial configuration dialog? [yes]: no Press RETURN to get started! Router> Enter no when you are asked the question, "Would you like to enter the initial configuration dialog? [yes]: " Would you like to enter the initial configuration dialog? [yes]: no Press RETURN to get started! Router> In this case study, the Cisco AS5300 is manually configured by using the Cisco IOS software. The automatic setup script is not used. Note Enter the show version command to see if the access server is recognizing all its modem cards. For example, the output field "96 terminal line(s)" indicates that the chassis can find all 96 integrated modems. Step 2-Configuring the Host Name, Password, and Time Stamps Assign a host name to the Cisco AS5300, enable basic security, and turn on timestamping. • Assigning a host name helps you to distinguish between different network devices. • Enabling passwords helps you to prevent unauthorized configuration changes. • Setting time stamps helps you to trace debug output for testing connections. Not knowing exactly when an event occurs hinders you from examining background processes. To configure the host name, enable password, and time stamps, use the following steps beginning in user EXEC mode: Step 1 Enter privileged EXEC mode. Router> enable Cisco IOS Dial Services Quick Configuration Guide 2-4