Cisco ASR1002 Network Positioning Guide - Page 23

Configuring Performance Metrics to Select a Service Configuring the Performance Manager on a CE-Facing PE Step 12 Command or Action do show pfm entity-number Example: switch# show pfm Purpose Displays the configured performance management information. • entity-number-Displays information for a specific entity. When not used, information for all configured entities is displayed. Configuring the PFM on a CE-facing PE: Example The CE-facing PE configured in this example has one CE that is not PfR MC-enabled, and two CEs that are PfR MC-enabled. pfm ce-facing entity 1 ce-table table1 entity 2 pfr-mc disable ce-table table2 entity 3 pfr-mc disable ce-table table10 pfm local-host 10.1.1.2 ce-table table1 ce-address ipv4 10.1.1.1 ce-address ipv4 20.1.12.1 ce-address ipv4 20.1.13.1 ce-address ipv4 20.1.10.2 ce-table table2 ce-address ipv4 50.1.1.1 pfr-mc ce-address ipv4 50.1.2.1 ce-table table10 ce-address ipv4 60.1.1.1 pfr-mc ce-address ipv4 60.1.2.1 ce-address ipv4 60.1.3.1 show pfm: Example This example shows sample output from the show pfm command: switch# show pfm Entity-ID PFM-ID 1 PFM-26.0.0.2-1 5 PFM-26.0.0.2-5 Active-PDP-Address 192.168.1.1 10.74.5.32 CE-Table cet123 What to Do Next Configure any DC-facing PEs. OL-25794-01 Cisco Network Positioning System Configuration Guide for the Cisco ASR 1000 Router, Release 1.0 17