Cisco ASR1006-10G-HA/K9 Installation Guide - Page 12
Chassis Rear Rack-Mount Brackets
View all Cisco ASR1006-10G-HA/K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Attaching the Chassis Rack-Mount Brackets Chapter 6 Cisco ASR 1006 Router Overview and Installation Step 2 Step 3 Step 4 Step 5 Position the front rack-mount bracket top hole with the chassis first top hole behind the side vent holes (see Figure 6-8). Insert and tighten the black screws on one side. Repeat Step 1 through Step 3 on the other side of the chassis. Use black screws to secure the rack-mount brackets to the chassis. Install the chassis in the rack. To install the Cisco ASR 1006 Router in a rack, go to the "Installing the Cisco ASR 1006 Router in a Rack" section on page 6-14. This completes the steps for attaching the front rack-mount brackets to the Cisco ASR 1006 Router. Chassis Rear Rack-Mount Brackets If you are rack-mounting the chassis using the rear rack-mount brackets, then this type of installation provides for the chassis being recessed in the rack. To install the front rack-mount brackets on the Cisco ASR 1006 Router, perform the following steps: Step 1 Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear t rack-mount bracket with the ear and holes facing outward and towards the rear of the chassis. 6-12 Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide OL-13208-09