Cisco CISCO2851 User Guide - Page 1

Cisco 2851 Integrated Services Router FIPS 140-2 Non Proprietary Security Policy Level 2 Validation Version 1.3 November 23, 2005 Introduction This document is the non-proprietary Cryptographic Module Security Policy for the Cisco 2851 Integrated Services Router without an AIM card installed. This security policy describes how the Cisco 2851 Integrated Services Router (Hardware Version: 2851; Firmware Version: 12.3(11)T03) meet the security requirements of FIPS 140-2, and how to operate the router with on-board crypto enabled in a secure FIPS 140-2 mode. This policy was prepared as part of the Level 2 FIPS 140-2 validation of the Cisco 2851 Integrated Services Router. FIPS 140-2 (Federal Information Processing Standards Publication 140-2-Security Requirements for Cryptographic Modules) details the U.S. Government requirements for cryptographic modules. More information about the FIPS 140-2 standard and validation program is available on the NIST website at http://csrc.nist.gov/cryptval/. This document contains the following sections: • Introduction, page 1 • Cisco 2851 Routers, page 2 • Secure Operation of the Cisco 2851 Router, page 17 • Related Documentation, page 18 • Obtaining Documentation, page 19 • Documentation Feedback, page 20 • Cisco Product Security Overview, page 20 • Obtaining Technical Assistance, page 21 • Obtaining Additional Publications and Information, page 22 Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA © 2005 Cisco Systems, Inc. All rights reserved.