Cisco CISCO876-K9 Configuration Guide - Page 82
crypto isakmp client configuration group, group-name | default}, domain, ip local pool {default
UPC - 882658036880
View all Cisco CISCO876-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Configure a VPN Chapter 7 Configuring VPNs Using an IPSec Tunnel and Generic Routing Encapsulation Configure Group Policy Information Perform these steps to configure the group policy, beginning in global configuration mode: Step 1 Command or Action crypto isakmp client configuration group {group-name | default} Example: Router(config)# crypto isakmp client configuration group rtr-remote Router(config-isakmp-group)# Purpose Creates an IKE policy group that contains attributes to be downloaded to the remote client. Also enters Internet Security Association Key Management Protocol (ISAKMP) policy configuration mode. Step 2 key name Example: Router(config-isakmp-group)# key secret-password Router(config-isakmp-group)# Specifies the IKE pre-shared key for the group policy. Step 3 Step 4 dns primary-server Example: Router(config-isakmp-group)# dns 10.50.10.1 Router(config-isakmp-group)# Specifies the primary Domain Name Service (DNS) server for the group. Note You may also want to specify Windows Internet Naming Service (WINS) servers for the group by using the wins command. domain name Specifies group domain membership. Example: Router(config-isakmp-group)# domain company.com Router(config-isakmp-group)# Step 5 exit Example: Router(config-isakmp-group)# exit Router(config)# Exits IKE group policy configuration mode, and enters global configuration mode. Step 6 ip local pool {default | poolname} [low-ip-address [high-ip-address]] Example: Router(config)# ip local pool dynpool 30.30.30.20 30.30.30.30 Router(config)# Specifies a local address pool for the group. For details about this command and additional parameters that can be set, see the Cisco IOS Dial Technologies Command Reference. Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide 7-4 OL-5332-01