Cisco CSS-11151-AC Hardware Installation Guide - Page 32
Installing the CSS 11050 or CSS 11150
UPC - 746320426525
View all Cisco CSS-11151-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing the CSS 11050 or CSS 11150 Chapter 1 Unpacking and Installing the CSS Concurrently, report the nature and extent of the damage to Customer Service. Report the problem or deficiency to Customer Service along with the model number and serial number. Upon receipt of this information, you will be provided with service instructions, or a Return Material Authorization (RMA) Number and shipping information. Installing the CSS 11050 or CSS 11150 The CSS 11050 or CSS 11150 can be placed on a flat surface as a free-standing unit or rack-mounted in an equipment cabinet. The following sections describe the steps to install the CSS as a: • Free-standing unit • Rack-mounted unit Prior to installing the CSS, observe the following installation requirements: • The ambient operating temperature is 32° to 104° F (0 to 40° C). If you install the CSS in a closed or multi-unit rack, the operating ambient temperature of the rack environment may be greater than the room ambient temperature. Ensure that the temperature does not exceed the CSS maximum ambient operating temperature. • The minimum clearance requirement is 2 inches (10 cm) of air flow space on both sides of the chassis. • Ensure that the CSS is reliably grounded to earth. We recommend that you do not use power strips or extension cords to connect the CSS to the power source. Caution Do not remove the CSS 11050 or CSS 11150 cover. There are electrical shock hazards present in the unit if the cover is removed. There are no serviceable or installable components available with the CSS 11050 and CSS 11150. Do not use a 3-prong to 2-prong electrical adapter. This will compromise the grounding. Note Removing the CSS 11050 or CSS 11150 cover voids its warranty. Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-6 78-15146-02