Cisco NME-X-23ES-1G User Guide - Page 46
Prerequisites, Configuration Tasks
UPC - 882658036118
View all Cisco NME-X-23ES-1G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Prerequisites 16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series • IPMROUTE-MIB • CISCO-MEMORY-POOL-MIB • ETHER-LIKE-MIB (RFC 1643) • CISCO-ENTITY-FRU-CONTROL-MIB.my • CISCO-RTTMON-MIB • CISCO-PROCESS-MIB • CISCO-COPS-CLIENT-MIB To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules, go to the Cisco MIB website on Cisco.com at the following URL: http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml RFCs • RFC 2284, PPP Extensible Authentication Protocol (EAP) Prerequisites • Cisco IOS Release 12.2 or later release • Basic configuration of the Cisco 2600 series, Cisco 3600 series, or Cisco 3700 series router In addition, complete the following tasks before configuring this feature: • Configure IP routing For more information on IP routing, refer to the Cisco IOS IP Configuration Guide, Release 12.2. • Set up the call agents For more information on setting up call agents, refer to the documentation that accompanies the call agents used in your network configuration. Configuration Tasks See the following sections for configuration tasks for the Ethernet switch network module. • Configuring Layer 2 Interfaces, page 47 • Configuring VLANs, page 52 • Configuring VLAN Trunking Protocol, page 54 • Configuring Layer 2 EtherChannels (Port-Channel Logical Interfaces), page 56 • Configuring 802.1x Authentication, page 59 • Configuring Spanning Tree, page 67 • Configuring MAC Table Manipulation - Port Security, page 72 • Configuring Cisco Discovery Protocol, page 74 • Configuring Switched Port Analyzer, page 76 • Configuring Network Security with ACLs, page 78 • Configuring Quality of Service (QoS), page 86 Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ 46