Cisco SFE2010P Administration Guide - Page 50
Stack Configuration, Port Status - 48 port switch
View all Cisco SFE2010P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Using the Console Port Status Stack Configuration You can use the Stack Configuration screen to specify the Stack ID for the Ethernet switch. By default, ID numbers are automatically assigned to each device. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 11. Stack Configuration. Port Status The Port Status menu provides access to screens where you can view the port status and the PoE status for each port on the switch. 1. Port Status (see page 48) 2. PoE Status (see page 48) 0.Back (Select to return to the previous screen.) To open this screen: From the Switch Main Menu, press 2. Port Status. SFE2010/SFE2010P Administration Guide 47
SFE2010/SFE2010P Administration Guide
47
Port Status
Using the Console
Stack Configuration
You can use the
Stack Configuration
screen to specify the Stack ID for the Ethernet switch. By
default, ID numbers are automatically assigned to each device.
To open this screen:
1.
From the
Switch Main Menu
, select
1. System Configuration
.
2.
From the
System Configuration
Menu
, select
11. Stack Configuration
.
Port Status
The
Port Status
menu provides access to screens where you can view the port status and the
PoE status for each port on the switch.
1.
Port Status (see page 48)
2.
PoE Status (see page 48)
0.Back (Select to return to the previous screen.)
To open this screen:
From the
Switch Main Menu
, press
2. Port Status
.