Cisco SFE2010P Administration Guide - Page 53
PoE Settings, right arrow, Space Bar, Port Configuration
View all Cisco SFE2010P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Using the Console Port Configuration To configure the ports: 1. Select Edit. 2. Proceed as needed: a. Press the down arrow key to scroll down through the list of ports. b. Press the right arrow key to move the cursor from one field to the next within a row. c. To change a setting, move the cursor to the field, and then press the Space Bar until the desired setting appears. Field Enable Auto Neg. Spd/Dpx Flow Ctrl Settings Enable or Disable On or Off Auto, 10H, 100H, 10F, 100F, 1000F Auto, On or Off 3. Press the Esc key to move the cursor to the Action list. 4. Select Save to save your settings 5. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. PoE Settings You can use the PoE Settings screen to specify the priority and PoE settings for each port. You can use the up or down arrow keys to scroll through all the ports on the Ethernet switch. To open this screen: 1. From the Switch Main Menu, press 3. Port Configuration. 2. From the Port Status Menu, press 2. Poe Settings. SFE2010/SFE2010P Administration Guide 50