Cisco SPA2102 Administration Guide - Page 210
Dial Plans VoIP-To-PSTN Gateway Setup ATA Voice Field Reference, on,
View all Cisco SPA2102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
ATA Voice Field Reference PSTN Line page (SPA3102) B Voice tab > PSTN Line page (SPA3102) > Dial Plans section Dial Plan 1/2/3/4/5/ Dial plan script for this line. 6/7/8 The default is (xx.) Dial plans in the dial plan pool to be associated with a VoIP Caller or a PSTN Caller. Each dial plan in the pool is referenced by a index 1 to 8 corresponding to Dial Plan 1 to 8. The dial plan syntax is the same as that used for Line 1. See "Dial Plan section," on page 180. Voice tab > PSTN Line page (SPA3102) > VoIP-To-PSTN Gateway Setup section VoIP-To-PSTN Gateway Enable Enable or disable VoIP-To-PSTN Gateway functionality. The default is yes. VoIP Caller Authentication Method Method to be used to authenticate a VoIP Caller to access the PSTN gateway. Choose from {none, PIN, HTTP Digest. The default is none. VoIP PIN Max Retry Number of trials to allow VoIP caller to enter a PIN number (used only if authentication method is set to PIN). One Stage Dialing The default is 3. Enable one-stage dialing (applicable if authentication method is none, or HTTP Digest, or caller is in the Access List). The default is yes. Cisco Small Business ATA Administration Guide 210