Cisco SPA3102-NA Administration Guide - Page 109
Optional Settings - manual
View all Cisco SPA3102-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
ATA Routing Field Reference WAN Status page A Router tab > WAN Setup page > Optional Settings section HostName Domain Primary DNS The host name of the ATA device. The network domain of the ATA device. The DNS server that is used by the ATA device. Secondary DNS NOTE: When DHCP is enabled, you can enter the IP address of a DNS server in addition to DHCP-supplied DNS servers. When DHCP is disabled, enter the primary DNS server. The default is 0.0.0.0. Sets the secondary DNS server to take over if problems are discovered with the Primary DNS server. NOTE: When DHCP is enabled, you can enter the IP address of a primary or secondary DNS server in addition to DHCP-supplied DNS servers. When DHCP is disabled, enter the primary and secondary DNS server. DNS Service Order DNS Query Mode The default is 0.0.0.0. The method for selecting the DNS server: Manual (enter the IP address of the DNS server manually; that is do not look at the DHCP-supplied DNS table), Manual/ DHCP, and DHCP/Manual. The mode of DNS query: parallel or sequential. NOTE: With parallel DNS query mode, the ATA device sends the same DNS lookup request to all the DNS servers at the same time, and the first incoming reply is accepted by the ATA device. The default is parallel. Primary NTP Server The IP address or name of the primary NTP server. Secondary NTP Server The IP address or name of the secondary NTP server. Cisco Small Business ATA Administration Guide 109