Cisco SPA3102-NA Administration Guide - Page 152
target_number, Referral Services
View all Cisco SPA3102-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
ATA Voice Field Reference Regional page B Referral Services Codes These codes tell the ATA device what to do when the user places the current call on hold and is listening to the second dial tone. One or more *code can be configured into this parameter, such as *98, or *97|*98|*123, etc. Max total length is 79 chars. This parameter applies when the user places the current call on hold (by Hook Flash) and is listening to second dial tone. Each *code (and the following valid target number according to current dial plan) entered on the second dial-tone triggers the ATA device to perform a blind transfer to a target number that is prepended by the service *code. For example, after the user dials *98, the ATA device plays a special dial tone called the Prompt Tone while waiting for the user the enter a target number (which is checked according to dial plan as in normal dialing). When a complete number is entered, the ATA device sends a blind REFER to the holding party with the Refer-To target equals to *98 target_number. This feature allows the ATA device to hand off a call to an application server to perform further processing, such as call park. The *codes should not conflict with any of the other vertical service codes internally processed by the ATA device. You can empty the corresponding *code that you do not want to ATA device to process. Cisco Small Business ATA Administration Guide 152