Cisco SPA508G Administration Guide - Page 84

Customizing Standard Features Configuring LDAP for the Cisco SPA300 Series and Cisco SPA500 Series IP Phones STEP 7 Click Submit All Changes. 3 Configure the Web Server from the Phone Screen Interface To enable the phone web user interface from the Phone tab (does not apply to the Cisco WIP310): STEP 1 Press menu. STEP 2 Select Network and Enable Web Server. STEP 3 Select the Edit. STEP 4 Press y/n to toggle the selection to Yes and enable. STEP 5 Click OK > Save. Configuring LDAP for the Cisco SPA300 Series and Cisco SPA500 Series IP Phones The Cisco SPA300 Series and Cisco SPA500 Series IP phones support Lightweight Directory Access Protocol (LDAP) v3. LDAP Corporate Directory Search allows a user to search a specified LDAP directory for a name, phone number, or both. LDAP-based directories, such as Microsoft Active Directory 2003 and OpenLDAP-based databases, are supported. (LDAP is not supported on the Cisco WIP310.) Users access LDAP from the Directory menu on their IP phone. There is a limit of 20 records returned from a LDAP search. The instructions in this section assume you have the following equipment and services: • A LDAP server, such as OpenLDAP or Microsoft Active Directory Server 2003 • A Cisco SPA300 Series or Cisco SPA500 Series IP phone running firmware version 6.1.3a or higher Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 83