Cisco SPA525G Administration Guide - Page 159
target_number, Features Dial Services Codes, c' = Cfwd dial tone
UPC - 882658261688
View all Cisco SPA525G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Configuring Regional Parameters and Supplementary Services Configuring Supplementary Services (Star Codes) 8 You can configure one or more * codes into this parameter, such as *72, or *72|*74|*67|*82, and so on. The maximum total length is 79 characters. When the user has a dial tone (first or second dial tone), they can enter a * code (and the following target number according to current dial plan) to trigger the Cisco IP phone to call the target number prepended by the * code. For example: a. After the user dials *72, the Cisco IP phone plays a special prompt tone while waiting for the user the enter a target number (which is validated according to the dial plan as in normal dialing). b. When a complete number is entered, the Cisco IP phone sends an INVITE to *72 target_number as in a normal call. This feature allows the proxy to process features such as call forward (*72) or BLock Caller ID (*67). The * codes should not conflict with any of the other vertical service codes internally processed by the Cisco IP phone. You can delete any * code you do not want to SPA9000 to process. You can add a parameter to each * code in Features Dial Services Codes to indicate what tone to play after the * code is entered, such as *72'c'|*67'p'. Following is a list of allowed dial tone parameters (note the use of back quotes surrounding the parameter without spaces). • 'c' = Cfwd dial tone • 'd' = Dial tone • 'm' = MWI dial tone • 'o' = Outside dial tone • 'p' = Prompt dial tone • 's' = Second dial tone • 'x' = No tones are place, x is any digit not used above If no tone parameter is specified, the Cisco IP phone plays the prompt tone by default. If the * code is not to be followed by a phone number, such as *73 to cancel call forwarding, do not include it in this parameter. In that case, add that * code in the dial plan. Cisco SPA and Wireless IP Administration Phone Guide 157