Cisco SPA525G Administration Guide - Page 213
SDP Payload Types, SPA9000 ignores the codec names in incoming SDP for standard payload types 0
UPC - 882658261688
View all Cisco SPA525G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
SPA and Wireless IP Phone Field Reference SIP Tab B Parameter Stats In BYE Description Determines whether the IP phone includes the P-RTPStat header or response to a BYE message. The header contains the RTP statistics of the current call. Select yes or no from the drop-down menu. The format of the P-RTP-Stat header is: P-RTP-State: PS=,OS=,PR=,OR=,PL=,JI=,LA=,DU=,EN=,DE=. Defaults to no. SDP Payload Types The configured dynamic payloads are used for outbound calls only where the SPA9000 presents the SDP offer. For inbound calls with a SDP offer, the SPA9000 follows the caller dynamic payload type assignments. The SPA9000 uses the configured codec names in its outbound SDP. The SPA9000 ignores the codec names in incoming SDP for standard payload types (0 - 95). For dynamic payload types, the SPA9000 identifies the codec by the configured codec names. Comparison is case-insensitive. Parameter AVT Dynamic Payload INFOREQ Dynamic Payload G726r16 Dynamic Payload Description AVT dynamic payload type. Ranges from 96-127. Defaults to 101. INFOREQ dynamic payload type. Defaults to blank. G.726-16 dynamic payload type. Ranges from 96-127. Defaults to 98. NOTE Not applicable to SPA525G/WIP310. Cisco SPA and Wireless IP Phone Administration Guide 211