Cisco SR216 User Guide - Page 11
Placement Options, Rack-mount
UPC - 745883556519
View all Cisco SR216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 2: Product Overview Placement Options There are three ways to physically install the Switch: • Set the Switch on its four rubber feet. • Mount the Switch in a standard rack (1U high). • Hang the Switch on a wall using its wall-mount slots. Rack-mount To rack-mount the Switch, follow these instructions: 1 . The Switch has four mounting holes on each side. Screw an included mounting bracket into each side. Rack-mounting the Switch 2 . Lift the Switch into the rack, and secure the brackets with additional screws (not included). 16-Port and 24-Port 10/100 Switches
´
Chapter 2: Product Overv±ew
16-Port and 24-Port 10/100 Sw±tches
Placement Options
There are three ways to physically install the Switch:
Set the Switch on its four rubber feet°
Mount the Switch in a standard rack (1U high)°
Hang the Switch on a wall using its wall-mount slots°
Rack-mount
To rack-mount the Switch, follow these instructions:
The Switch has four mounting holes on each side° Screw an included
mounting bracket into each side°
Rack-mounting the Switch
Lift the Switch into the rack, and secure the brackets with additional
screws (not included)°
•
•
•
1°
2°