Cisco WIP310-G1 User Guide - Page 13

Chapter 2 Installing the WIP310 Accessing the Wireless Network The first time you power on the phone, the phone is not configured to connect to a network. To connect your phone to your wireless network, you need to set up a Wireless Profile. There are two ways to configure the WiFi Profile: Automatically via Wi-Fi Protected Setup® and Manually. NOTE: When configuring the phone's wireless network, you should be as close as possible to the wireless router. For normal use, the phone should be within 300 feet (90 m) of the wireless network to connect. Using Wi-Fi Protected Setup If your wireless router supports Wi-Fi Protected Setup, you can use this option to automatically connect the phone to your wireless network. NOTE: Look for the Wi-Fi Protected Setup button on your router. If you are not sure that your router supports this feature, consult your router User Guide. Wi-Fi Protected Setup button ††The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. Using the Push Button Method The easiest way to connect your phone to the wireless network is the push button method. 1. Press the Power/End Call button to power on the phone. Power/End Call button 2. When the Home screen appears, press the Select button to display the Settings menu. Press the Select Button again and navigate to the Wireless Setup menu. Settings Menu 3. Press the Select button to view your options. 4. To automatically configure your profile, navigate to Use Wi-Fi Protected Setup and press the Select button. Wi-Fi Protected Setup 5. Navigate to Connect easily by pushing a button. Connect Screen 6. Press the Select button. 7. Follow the phone's on-screen instructions to connect your phone to your network using Wi-Fi Protected Setup: Wireless-G IP Phone 9