Cisco WS-C1924-EN-DC Hardware Installation Guide - Page 30
Specifications - dimensions
UPC - 746320098463
View all Cisco WS-C1924-EN-DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Specifications Chapter 1 Overview of the Router Table 1-6 Interface Numbering (continued) Slot Number Slot 0 Slot 1 Slot Type EHWIC/HWIC/WIC EHWIC/WIC/VWIC Slot Numbering Range 0/0/0 to 0/0/0 (single-wide) 0/1/0 to 0/1/0 (single or double-wide) Note On the Cisco 1900 series router, the numbering format for configuring an async interface is 0/slot/port. To configure the line associated with an async interface, simply use the interface number to specify the async line. For example, line 0/0/0 specifies the line associated with interface serial 0/0/0 on a WIC-2A/S in slot 0. Similarly, line 0/1/1 specifies the line associated with interface async 0/1/1 on a WIC-2AM in slot 1. Specifications Table 1-7 lists the specifications for Cisco 1905 and Cisco 1921 series routers. Table 1-8 lists the specifications for Cisco 1940 series routers. Table 1-7 Cisco 1905 and 1921 Series Router Specifications1 Description Specification Physical Dimensions without rubber feet 1.75 in x 13.5 in x 11.5 in (4.4 cm x 34.3 x 29.2 cm), 1 RU2 height (H x W x D) Rack-mount 19 in. (48.3 cm) EIA Optional Weight (no modules installed) Approximately 12 lbs Weight with PoE 12.8 lbs Maximum Weight-Fully Configured 14 lbs Power AC input power • Input voltage 100 to 240 VAC, autoranging • Frequency 47 to 63 Hz • Input current (max) 1.5 to 0.6 A • Typical power (no modules) 25 W • Power (max) with AC 60 W • Power (max) with PoE (platform only) 70 W • Maximum PoE device power capacity with PoE power supply 80 W 1-14 Cisco 1900 Series Hardware Installation OL-19084-02