Cisco WS-C2960S-24PS-L Hardware Installation Guide - Page 67
Installing the Switch On a Wall, Switch with the CLI-Based Setup Program.
View all Cisco WS-C2960S-24PS-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 3 Switch Installation (8-Port Switches) Figure 3-6 Installing the Switch On a Wall 1 3 2 Installing the Switch 204629 2 2 1 Switch 3 Slides on this way 2 Screw After the switch is mounted on the wall, do these tasks to complete the installation: 1. Power on the switch. See the "Verifying Switch Operation" section on page 3-5. 2. Connect to a 10/100 or 10/100/1000 port, and run Express Setup. See the switch getting started guide for instructions. 3. Connect to the front-panel ports. See the "Connecting to the 10/100 and 10/100/1000 Ports" section on page 2-14, the "Connecting to SFP Modules" section on page 2-18, and the "Connecting to a Dual-Purpose Port" section on page 2-20 to complete the installation. For configuration instructions about using the CLI setup program, go to Appendix C, "Configuring the Switch with the CLI-Based Setup Program." OL-7075-09 Catalyst 2960 Switch Hardware Installation Guide 3-13