Cisco WS-C3548-XL-EN Installation Guide - Page 85
Step 7, Enter, con it as a member switch or as a standalone switch.
UPC - 746320320243
View all Cisco WS-C3548-XL-EN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 2 Installing and Starting Up the Switch Assigning Switch Information Note On a command switch, the host name is limited to 28 characters; on a member switch to 31 characters. Do not use -n, where n is a number, as the last characters in a host name for any switch. Step 7 Enter host name: host_name Enter a secret password (which ensures switch security), and press Return: Note The secret password can be from 1 to 25 alphanumeric characters, can start with a number, is case-sensitive, and allows spaces but ignores leading spaces. Step 8 Step 9 Enter enable secret: secret_password Enter Y to enter a Telnet password: Would you like to configure a Telnet password? [yes]: y Enter the Telnet password, and press Return: Note The Telnet password can be from 1 to 25 alphanumeric characters, is case-sensitive, allows spaces, but ignores leading spaces. Enter Telnet password: telnet_password Step 10 Enter Y to configure this switch as the cluster command switch. Enter N to configure it as a member switch or as a standalone switch. Note If you enter N to configure the switch as a member switch or as a standalone, it appears as a candidate switch in Cluster Builder and the Step 11 message is not displayed. Would you like to enable as a cluster command switch? y 78-6456-04 Catalyst 3500 Series XL Hardware Installation Guide 2-27