Cisco WS-C3560E48PDSF-RF Installation Guide - Page 101
Connector and Cable Specifications, 10/100 Ports
UPC - 882658132667
View all Cisco WS-C3560E48PDSF-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
APPENDIX B Connector and Cable Specifications This appendix describes the Catalyst 3500 XL switch ports and the cables and adapters that you use to connect the switch to other devices. Connector Specifications 10/100 Ports The 10/100 Ethernet ports use standard RJ-45 connectors and Ethernet pinouts with internal crossovers, as indicated by an X in the port name. These ports have their transmit (TD) and receive (RD) signals internally crossed so that a straight-through cable and adapter can be attached to the port. Figure B-1 shows the pinout. When connecting the 10/100 ports to compatible workstations, servers, routers, and Cisco IP Phones, you must use a straight-through cable wired for 10BaseT and 100BaseTX (Figure B-5 illustrates the straight-through cable schematics). When connecting to other switches or repeaters, ensure that you use a crossover cable. (Figure B-4 illustrates the crossover cable schematics.) Note Use a straight-through cable to connect two ports when one of the ports is designated with an X. Use a crossover cable to connect two ports when both ports are designated with an X or when both ports do not have an X. 78-6456-04 Catalyst 3500 Series XL Hardware Installation Guide B-1