Cisco WS-C3750G-24TS-E1U Software Configuration Guide - Page 160
AIC CLI Configuration for Alarms
View all Cisco WS-C3750G-24TS-E1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
NM-AIC-64, Contact Closure NetworkConfiguration Examples Appendix A Configuration Examples ! dial-peer cor custom ! line con 0 exec-timeout 0 0 transport input none line 33 no exec transport preferred none transport input telnet transport output none stopbits 1 line aux 0 line vty 0 4 password lab login ! no scheduler allocate ! end AIC CLI Configuration for Alarms These examples are output from the show alarm config # command. Discrete Alarm description:west door normally closed normal state description:door closed alarm state description:door open SNMP trap:enabled Analog Alarm Monitoring Current description:thermostat high-high state description:very hot high state description:hot normal state description:just right low state description:cold low-low state description:very cold current-loop -5.2 5.4 15.0 25.0 35.1 45.6 SNMP trap:enabled Analog Alarm Monitoring Current Configured as a Discrete description:east door configured as discrete normal state description:door closed alarm description:door open current-loop 0.0 3.2 5.9 SNMP trap:enabled A-22 Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers OL-1957-04