Clifford Concept 50 Owners Guide - Page 18
Multiple-event TotalRecall™, Headlight reminder, Remote QuickAccess™
View all Clifford Concept 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Multiple-event TotalRecall™ The system's non-volatile memory records the identity of the last eight activated or malfunctioning triggers and/or sensors, which allows your installer to instantly track down malfunctions and save you substantial servicing costs. To identify the triggers and/or sensors held in the system's non-volatile memory, simply perform the following procedure: 1. With the ignition OFF, flick the PlainView valet switch to its latched side. 2. Press button I to "arm" the system, then again to "disarm." 3. The LED will blink 1-6 times to indicate the most recently activated trigger or sensor, pause, then blink 1-6 times to indicate the next most recently activated trigger or sensor, and so on for the last 8 activations (beginning with the most recent). 4. Write down the number of blinks between pauses and refer to the chart below: Number of LED blinks per cycle Trigger/sensor that was activated or malfunctioned 1 blink Magnetic Resonance Sensor 2 blinks Glass tampering sensor 3 blinks Door trigger 4 blinks Trunk trigger 5 blinks Hood trigger 6 blinks Proximity Sensor or other optional sensor Headlight reminder If you turn the ignition off and open the driver's door to exit the car without having turned off the headlights, you will be reminded to turn them off with a distinctive warning tone. If your vehicle already has a similar warning feature, you may turn off your Concept 50's Headlight Reminder. See the User-selectable features section on pages 19-21. Remote QuickAccess™ For the greatest ease of use, the Remote QuickAccess features permit you a quick and easy way of controlling, with just the remote, the most commonly used features. You can control either of these features any time via your remote control. Here's how: QuickAccess Valet Mode: To enter valet mode remotely, transmit channel 10 (press the LevelShift button on the side of the remote control twice, then press button 2). The parking lights will flash twice and the dashboard LED will stay on to indicate the system is in valet mode. To exit valet mode remotely, transmit channel 10 again and the system will exit of valet mode with one parking light flash and the LED will turn off. (NOTE: If you enter valet mode via the remote control, exit valet mode in the same manner. If you use the PlainView switch to enter valet mode, use the switch to exit valet mode.) QuickAccess Long-Term Chirp Silencing: To silence the chirps, transmit channel 9 (press the LevelShift button on the side of the remote control twice, then press button 1). The parking lights will flash twice to indicate that long-term chirp silencing is on. To restore the chirps, transmit channel 9 again and the system will confirm restoration of the chirps with one flash of the parking lights. 16