Clifford Cyber 3 Owners Guide - Page 6
microprocessor commands and monitors all system functions more than - 12
View all Clifford Cyber 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Standard Features of the Cyber 3 (cont.) TotalRecall™- Cyber 3's memory stores the identity of the last trigger or sensor activated. This provides an invaluable diagnostic means, since, whenever you wish, the system will visually identify the last activated trigger or sensor. Patented Smart Prior Intrusion Attempt Alert - When you return to your vehicle and remotely disarm your Cyber 3, a special chirp and parking light flash sequence will audibly and visually alert you from a distance if an intrusion attempt was foiled while you were away. Your Cyber 3 will even identify the specific trigger or sensor that detected the intrusion attempt. High-Output Siren - Loud siren wail for 30 seconds when the alarm detects an intrusion attempt. The system then automatically resets and rearms. Patented Remote Control Code Learning - Just a few flicks of a switch lets you match to the system up to 4 different 12-channel Clifford ACG remote controls. Just as easily, a lost or stolen remote control can be deleted from the system memory. Control Unit with 5 Channels- For remote controlled system operation and remote controlled accessories. Advanced CMOS Microcomputer -Very large scale integration (VLSI) microprocessor commands and monitors all system functions more than 1,000,000 times per second, yet it draws less power than the vehicle's clock, so it won't deplete your car battery like other alarms. Selectable Starter/Ignition Interrupt - You may choose either a fault-proof mode, which lets you start the engine even in the unlikely event of a system malfunction, or ultra-secure mode that ensures a thief won't be able to start the vehicle even if he finds the system control unit and disconnects it! Hood/Trunk Trigger Input- For full perimeter protection of the engine compartment and trunk contents (may require optional pin switches). High-Luminescence LED Status Indicator - Adds visual deterrence and identifies system status. Patented SmartPowerUp™ II - When power to the system is disconnected, the system's non-volatile memory always remembers the last state (armed, disarmed or valet mode) and returns to that state when power is restored. So if a thief disconnects the power and then restores it in an attempt to start the car, the system will re-arm and instantly sound the siren while immobilizing the vehicle. 5