Clifford Garage Door Receiver ACG Owners Guide - Page 5

How to useyourkeychainremote control Clifford Electronics makes two types of Anti-CodeGrabbing remote controls. The 3-channel Button Clifford remote control illustrated to the right and a 12-channel remote control illustrated below. The 3-button/3-channel remote control can command three different items, while the 4-button/12-channel model can command the Programmable Receiver's three BO on 2 Sutton 3 different channels plus up to nine other functions of additional Programmable Receivers and/or Clifford vehicle security systems and accessories on your vehicle(s). LED indicator You select and transmit the channels in the following manner: aeon 4 ■ To transmit either channel 1, Z 3 or 4: Just Button 3 press either button 1,2,3 or 4. For instance, to transmit channel 3, press button 3. While you transmit, the LED indicator will blink once every second: • this indicates level 1. LED indicator 11 Sutton f ,LevelShitt button Sutton 2 ■ To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts buttons 1-4 to level 2 (channels 5-8). Then press the desired button within the next 7 seconds. For instance, to transmit channel 5, press the LevelShift button once, then press button 1. While you transmit, you'll notice that the LED indicator blinks twice, pauses, blinks twice, etc.: this indicates level 2. ■ To transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts buttons 1-4 to level 3 (channels 9-12). Then press the corresponding button within the next 7 seconds. For instance, to transmit channel 12, press the LevelShift button twice, then press button 4. While you transmit, you'll notice that the LED blinks three times, pauses, blinks three times, etc.: this indicates level 3. NOTE: One secondafteryoustop transmittinglevel2 orlevel3 (channels 5-12), theremote controlautomaticallyreturns tolevel1(channels 1-4). 5