Clifford Garage Door Receiver ACG Owners Guide - Page 6

Clifford Garage Door Receiver ACG Manual

Page 6 highlights

How to program CliffordACGremote controls into the 3-Door Programmable Garage Door Receiver Your 3-Door Programmable Receiver can recognize as many as 8 different Clifford remote controls with Anti-CodeGrabbing (ACG). Please note that this product will not work with older Clifford remote controls. ACG Remote controls are available.from your local Clifford dealer oryou may call the Clifford Customer Service Department tollfree at (800) 824-3208. To Add a new ACG Remote Control to the Programmable Receiver: 1. To control output 1, tap the blue button on the face of the 3-Door Programmable Receiver until the red LED for output 1 illuminates. 2. Press the Clifford ACG remote control button (or channel) that you want to use to activate garage door opener #1. Release the remote control button when the LED turns off to indicate that the receiver has stored the transmitted channel in its non-volatile memory. 3. To control a second garage door opener, tap the blue button on the 3-Door Programmable Receiver until the indicator light for output 2 illuminates. 4. Transmit the channel you want to use to activate garage door opener #2. Immediately release the button when the Programmable Receiver's red LED turns off. Output 2 is now programmed. 5. To program a third garage door opener, tap the blue button on the 3-Door Programmable Receiver until the indicator light for output 3 illuminates. 6. Transmit the channel you want to use to activate garage door opener #3. Immediately release the button when the Programmable Receiver's red LED turns off. Output 3 is now programmed. How to delete a lost or stolenremote control If you wish to delete a lost or stolen remote control, you need to "push" its code out of the receiver's memory. Doing so is simple. Just repeat steps 1-6 above for a total of 8 times with your current remote control. If you are using two remote controls, repeat steps 1-6 four times for each. If using more than two remote controls, program each so that the total adds up to eight. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7