Cobra 18 WX ST II 18WXSTII_MANL1 - Page 13

Antenna, Connector, External, Speaker, Power - installation

Page 13 highlights

Operation Rear Panel Antenna Connector. This female connector permits connection of the transmission line cable male connector to the transceiver. Antenna Connector EXT. SPKR. POWER 13.8V DC ANTENNA External Speaker. The External Speaker Jack is used for an external speaker. The external speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts. When the external speaker is plugged in, the internal speaker is automatically disconnected. External Speaker Note Cobra external speakers are rated 15 watts Power: This cable is permanently attached to the radio. If you wish to remove the radio after installation, disconnect at fuse holder and ground connector. Power 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

13
Rear Panel
Antenna Connector.
This female connector per-
mits connection of the transmission line cable
male connector to the transceiver.
External Speaker.
The External Speaker Jack is
used for an external speaker.The external speak-
er should have 8-ohm impedance and be rated
to handle at least 4.0 watts. When the external
speaker is plugged in, the internal speaker is
automatically disconnected.
Power:
This cable is permanently attached to the
radio. If you wish to remove the radio after instal-
lation, disconnect at fuse holder and ground
connector.
Antenna
Connector
Operation
External
Speaker
EXT. SPKR.
POWER
13.8V DC
ANTENNA
Power
Note
Cobra external speakers are
rated 15 watts