Cobra 29 LX CAMO User Manual - Page 10

Operation Operation Setting the Once alarm settings are complete, rotate Menu/Enter Alarm continued knob clockwise to Set Snooze and press to select. B/ANL ANL SNWoRte1.5 2 3 CAL TX EXIT SCAN CH 9/ 19 SET SNOOZE Default snooze time lengRtXh MEM SCAN S/RF SWR RiFs 10 minutes. ALARM LENGTH CAL NSIoGte1 3 5 7 9 +30dB Press Dim/Escape buttonMtEoN U SQreturn tDoYCNBAsMtIaKnEdby mode. CB / WX / PA DIM ESC PU SEHnEtNeTrE MEM Rdesired WX ! snooze time (from 1 to 60 minutes). Select Enter toReFxiGtA, IrNeturn DtoELSTeAtTSUnNEoozeT oBrACAKlarmSCWALR Radio Check Mode Allows testing of important radio functions. Test 1- Battery Level: Confirms that battery voltage level is between 10.8 V to 15.8 V. If in that range, it is "PASS". Outside of that range, either FAIL LOW" or "FAIL HIGH" will be displayed. Press Menu/Enter knob to advance to next test. 1 Radio Check Mode Note Press Dim/Escape button to return to CB standby mode. If 10 seconds pass or if Enter button pressed, unit goes to 2nd test. Note Length. Select Alarm Length to set alarm duration Default alarm length (from 10 to 300 seconds). Pressing Menu/Enter is 60 seconds and is set in knob returns unit to exit, Set Snooze or Alarm MIN 10 second increments. Length. MIN MAX OFF 2 3 Setting the Setting the Count Down Timer Note Press Push-To-Talk within 10 Count Down To set the count down timer, press Menu/Enter seconds or unit will go to the Timer knob and select Set Count Down. ANL NL SWNRot1.e5 2 3 CAL TX SET CLOCK SCAN CH 9/ 19 SET ALARM RF RF Press Dim/Escape buttRonX to WR SET COUNT DOWN AL return to CB standby mode. SIG 1 3 5 7 9 +30dB MENU PU SH SQ DYNAMIKE MEM SCAN CB / WX / PA DIM ESC FE NoTlElRow MEM WX ! instructions in Setting the Clock section (page 17) to sReFtGcAoINunt doDwENLnBT/AAhNLToUuNrEandT BACK SWR CAL NB /ANL minutes. Once desired count down time NB/ANL SWR ANL is1.5 2 3 CAL TX Test 2- RF Power Output: Confirms 3.3 to 4 Watt output level. Once Push-to-Talk button is pressed, Pass or Fail will be displayed if level is outside limits. 1 RF POWER OUTPUT 2 NB/ANL SWR 1.5 2 3 ANL CAL TX 3 RF SCAN PCHO199W/ ER OUTPUT next test. Note Press Dim/Escape button to return to CB standby mode. If 10 seconds pass or if Enter button pressed, go to 3rd test. SCAN CH 9/ 19 MIN Key Tones KesaenyldeTcroteentdue,rsnprMteosostdhMeeesOntaunn/dEabnnytdemrOekfnnfoub. again to set Test 3- Antenna Mismatch Warning: Press MIN MAX S/ RF SWR /CAL S/RF SWR CAL RF SIG 1 OFF VOL SQ PASS FAIL S/RRXF S/RF RF SWR 3 5 79 +30SdW B R/CAL MENU CAL SIG PU SH ENTER DYNAMIKE VOL SQ RX MEM SCAN 1 MEM 3 5 79 WX ! +30dB CB / WX / PA MENU PU SH ENTER MEM DYNRAFMGIKAEIN DELTA TUNE T BACK DIM ESC WX ! SRCW FALGRAIN DELTA TUNE MEM SCAN CB / WX / DIM PA ESC Note PTreBsAsCKDimSC/WAELRscape button to Mode Press Menu/Enter knob and rotate clockwise Push-to-Talk button to check antenna/radio for return to CB standby mode. to Set Key Tones. Press Menu/Enter to set Key proper matching. If 10 seconds pass or if Enter Note Tones On/Off. button pressed, testing is NB/ANL Press Dim/Escape PRESS PTT complete. Unit will return to NB/ANL SWR 1.5 2 3 button to return to CB mode. SET KEY TONES TO CHECK CB Standby mode. ANL CAL TX ON ANTENNA S/RF S/RF RF RX SWR Press Menu/EnOtFerFknob to select On/Off and PAANSTSENNA FAANITLENNA SWR/CAL CAL SIG 1 3 5 7 9 +30dB MENU PU SH ENTER e1x8it to main menu. 19 VOL SQ DYNAMIKE MEM WX ! RF GAIN NB /ANL OFF MIN NB/ANL SWR 1.5 2 3 OFF 1 CAL TX MINMIN MAX OFF MIN MAX SCAN CH 9/ 19 OFF 2 3 S/RF NB/ANLSWR /CAL NB/ANL ANL SCAN S/RF RF CH 9/ 19 RX SWMERM SCAN CAL CB / WXS/IG PA SWR 1.5 2 1 3 DIM3 5 79 NB /ANL ESC CAL TX +30dB NB/ANLM ESNWU RP US 1.5 H E 2 N T E3R MEM WX ! CAL TX SCAN CH 9/ 19 MEM SCAN CB / WX / PA ANLVOL S/ RF S/RF RF DELTASTWURNE SWR /CAL CAL SIG SQ T BACK 13 5 DYNAMS/RIRKXFE SWR CAL 7 9 +30SdW B R/CAL MENU ANL S/RF RF SWR CAL SIG PU SH ENTER VOL OFFSQ DYNAMMIKINE VOL SQ RXRF GAIN MEMDSCEALNTA TUNE 1 MEM 35 WX ! 7 9 +30dB MENU PU SH CB / WX / PA ENTER MEM DYNRAFMGIKAEIN MINDELTA TUNEMAXT BACK DIM ESC WX ! SRCW FALGRAIN T BACK OFFDELTA DIM ESC SWR CAL TUNE SCAN MEM SCAN CB / WX / PA T BACK CH 9/ 19 DIM ESC SWR CAL OFF MIN MIN MAX OFF