Cobra 29 LX CAMO User Manual - Page 11

Operation Setting Display Setting Display Color Mode Color Mode 1 Press Menu/Enter knob and scroll down to select Display Color. NB /ANL NB/ANL SWR 1.5 2 3 ANL 2CAL TX WX AUTO SCAN SCAN CH 9/ 19 S/ RF SWR /CAL S/RF SWR CAL RF SIG VOL SQ 1 RX DISPLAY COLOR MEM SCAN BRIGHTNESS CB / WX / PA 3 5 79 DYNAMIKE +30dB PMrEeNsUsP UaSnH dENrTeERleaMseEMMWReXFn!GuA/INEnterDEtLoTAsTeUtNtEhe TcoBAloCKr. DIM ESC SWR CAL 3 OFF MIN MIN MAX OFF Rotating Menu/Enter knob clockwise changes the display color from green to blue to amber to red then back to green. NB /ANL Note 4 NB/ANL SWR 1.5 2 3 CAL TX TURN CH KNOB TO SCAN CH 9/ 19 Select EXITANtLo return to SET COLOR S/RF main menSSu/WR.RFPrReFss Dim/Escape EXIT SbWuRt/tCoAnL to CrAeLturnSItGo C1 B m3 od5e7. 9 VOL SQ DYNAMIKE RX +30dB PrMeEsN Us PMU SeH nENuTE/REntMeErM WX ! knRFoGbAIoNr to exit routine. MEM SCAN CB / WX / PA escDaEpLTeAbTUuNtEtonTaBgAaCKin DIM ESC SWR CAL OFF MIN MIN MAX OFF 20 Operation Setting Brightness Mode Press Menu/Enter knob to select Set Brightness Rotate Menu/Enter knob clockwise to Select Brightness. Press Menu/Enter knob to select Day-Bright. Turn Menu/Enter clockwise to increase brightness and turn counter-clockwise to decrease brightness. Setting Brightness Mode Note If an attempt is made to exceed the highest or lowest brightness levels, 1 error beep will be heard. Note Exit will return to menu mode. ESC will exit and return to CB Standby. To set the day bright level, turn the Menu/Enter knob clockwise to a desired setting and then press Menu/Enter. To set the Night-Dim level, repeat instructions above then select Night-Dim. TURN CH KNOB TO SET LEVEL Note To select day or night levels, press and release Dim/Escape button once levels are set. Note To toggle from day to night settings, see page 24. Press Menu/Enter knob again to exit routine. Setting Contrast Mode Press Menu/Enter knob and rotate clockwise to select Set Contrast. Press Menu/Enter knob again and rotate clockwise to increase contrast, counter-clockwise to decrease contrast. Press Menu/Enter knob to set contrast. TURN CH KNOB TO SET CONTRAST Press Menu/Enter knob again to exit routine. Setting Contrast Mode Note If an attempt is made to exceed the highest or lowest contrast levels, 1 error beep will be heard. 21 Weather Auto