Cobra 29 LX CHR LE User Manual - Page 12

Operation Calibrate for SWR continued Note When switched to SWR mode the meter reading should ideally be as far to the left as possible. Anything over 3 is not acceptable. A slight antenna height adjustment (higher or lower) may be required. Repeat recalibration steps. NB /ANL SWR 1.5 2 3 CAL S/ RF SWR /CAL RF SWR SIG 1 VOL SQ RX 3 5 7 9 +30dB DYNAMIKE MENU PU SH ENTER MEM OFF MIN M 5 While still holding down the mic button, press and release the S/RF SWR CAL button to the SWR setting, to read the SWR reading. 6 Repeat the same steps two through five on Channel 1 and 40. This will check SWR for all channels. To Receive To Receive NB /ANL NB/ANL SWR 1.5 2 3 CAL ANL S/ RF S/RF RF RX SWR SWR /CAL CAL SIG 1 3 5 7 9 +30dB MENU PU SH ENTER VOL SQ DYNAMIKE MEM W OFF MIN MIN 1 Rotate the On/Off Volume knob clockwise. The RX icon will be displayed. 12