Cobra 29 LX CHR LE User Manual - Page 5
Mount.the.microphone., bracket.on.either.side., of.the.unit.driver's.left., using.two.screws.sup,
View all Cobra 29 LX CHR LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation 6 Plug power cable into back of unit marked "Power". Be sure to observe polarity markings. 7 Mount the microphone bracket on either side of the unit (driver's left) using two screws supplied. Bracket should be placed under the dash . so microphone is readily accessible. Note If microphone is not connected, audio will not be heard at speaker. 8 Attach the 4-pin microphone cable to . receptacle on front of unit and install unit . in bracket securely. 5
5
..
Plug.power.cable.into.back.of.unit.marked.
“Power”±..Be.sure.to.observe.polarity.markings±
..
Mount.the.microphone.
bracket.on.either.side.
of.the.unit.(driver’s.left).
using.two.screws.sup-
plied±.Bracket.should.be.
placed.under.the.dash..
so.microphone.is.readily.
accessible±
6
7
..
Attach.the.4-pin.microphone.cable.to..
receptacle.on.front.of.unit.and.install.unit..
in.bracket.securely±
8
Installation
Note
If microphone is not
connected, audio will not
be heard at speaker.