Cobra MR HH330 FLT MRHH330_MANL_ENG - Page 17
Advanced Operation, Tri-Watch Mode
View all Cobra MR HH330 FLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Advanced Operation VOHpFerMatainrigneYoRuardRioadPirootocols TRI-WATCH Button TRI and MEM Icons Channel Up/Down Button Tri-Watch Mode Tri-Watch mode gives you one (1) button access to scan a total of three (3) channels of most importance to you. Channel 16 is preprogrammed and will always be one (1) of the scanned locations. Two (2) other channels of your choice can be stored in the radio. These channels can be edited and/or recalled during future engagements of Tri-Watch mode. NOTE The radio must be squelched for Tri-Watch mode to function. See page 20 for Squelch procedure. Tri-Watch Setup To Program or Edit the Tri-Watch Channels: 1. Press and hold the TRI-WATCH button for two (2) seconds to activate Tri-Watch Setup mode. The TRI and MEM icons on the display will turn On. NOTE The main channel number will flash to indicate channel position. If there is no input activity for 15 seconds, the radio will sound two (2) beeps and return to Marine Standby mode. 2. Press Channel Up/Down button to select the desired Tri-Watch channel. 3. Press and release TRI-WATCH button or Call/Enter/Setup button to confirm entry. 4. Repeat steps 2 and 3 to program the remaining additional Tri-Watch memory channel. 5. After programming both Tri-Watch memory channels the radio will immediately engage Tri-Watch mode. Advanced Operation VOHpFerMatainrigneYoRuardRioadPirootocols TRI-WATCH Button Tri-Watch Scan Mode Using Tri-Watch Tri-Watch Scan Mode: 1. From Marine Standby mode, press the TRI-WATCH button. The TRI icon will appear on the LCD display and the radio will scan through the three (3) Tri-Watch memory channels. 2. A signal on any one (1) of the three (3) channels will stop the scan for 10 seconds to allow you to listen to the traffic on that location. NOTE After the Tri-Watch scan stops to monitor a channel, as long as you do not press any buttons within 10 seconds, your radio will automatically resume scanning the Tri-Watch channels. 3. Press the Channel Up/Down button to resume scanning the Tri-Watch channels or to change the scan direction. 4. To EXIT the Tri-Watch scan, press the TRI-WATCH button again. The TRI icon will disappear from the LCD and the radio will return to Marine Standby mode. 28 English Nothing Comes Close to a Cobra® 29