Cobra MR HH330 FLT MRHH330_MANL_ENG - Page 19
Memory Location Scan Mode, Channel Scan Mode, Squelch, To Enter Memory Location Scan, Marine Standby
View all Cobra MR HH330 FLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Advanced Operation OVHpeFrMatainrigneYoRuardRioadPirootocols Scanning Channel Scan Mode During Channel Scan mode, the radio will rapidly switch from channel to channel through all the channels. SCAN Button SCAN Icon NOTE The radio must be squelched for Channel Scan mode to function. See page 20 for Squelch procedure. To Enter Channel Scan: 1. From Marine Standby mode, press the SCAN button. The radio will immediately begin to scan the entire channel map selected in the active channel map. The SCAN icon will show on the LCD. 2. A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location. 3. Press the Channel Up/Down button to resume scanning the Channel Scan channels or to change the scan direction. 4. To EXIT Channel Scan mode, press the SCAN button again. The SCAN icon will disappear from the LCD and the radio will return to Marine Standby mode. Channel Up/Down Buttons Advanced Operation VOHpFerMatainrigneYoRuardRioadPirootocols Memory Location Scan A A Memory Location Scan Mode During Memory Location Scan mode, the radio will rapidly scan through all pre-assigned memory channels. NOTE The radio must be squelched for Memory Location Scan mode to function. See page 20 for Squelch procedure. NOTE If there are fewer than two (2) memory locations programmed in the radio, the Memory Location Scan option will not be available. To program at least two (2) memory locations, see page 30. MEM/ESC Button SCAN Button To Enter Memory Location Scan: 1. From Marine Standby mode, press the MEM/ESC button. 2. Press the SCAN button. The radio will immediately begin to scan all pre-assigned memory channels. The SCAN and MEM icons will show on the LCD. 3. A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location. 4. Press the Channel Up/Down button to resume scanning the Memory Location Scan channels or to change the scan direction. 5. To EXIT Memory Location Scan mode, press the SCAN button again. The SCAN and MEM icons will disappear from the LCD and the radio will return to Marine Standby mode. 32 English Nothing Comes Close to a Cobra® 33