Cobra MR HH600 FLT GPS BT MR HH600 Manual - English - Page 14

Setup Mode Programming VOHpFerMatainrigneYoRuardRioaPdirootocols Intro Operation Weather Alert Customer Assistance Warranty This setting will allow you to choose whether activate the Weather Alert feature. When NOAA broadcasts a Weather Alert Signal and your radio is in the Weather Alert mode, you will hear a InstallationcontiCAnsuussitsootmaunecsre audible tone and the radio will automatically switch to Weather Radio mode. The alert indicators will sound regardless of what channel you are opSeecornadatriynIcgonos n as soon as a NOAA alert signal is received Menu Soft Key Notice Channel Up/Down Buttons To Turn Weather Alert On Or Off: 1. Enter the Settings menu and scroll to WEATHER ALERT with CtahuteionUp/DowWnarnsinogft keys or the Up/Down channel buttons. 2. Press the ENTER soft key and observe the current Weather Alert setting - ON or OFF. 3. Use the Up/Down soft keys or the Up/Down channel buttons to switch to the setting you want. 4. Press the ENTER soft key to select the setting. Or press the EXIT soft key to EXIT without making changes to the Weather Alert setting. The radio will turn on the Weather Icon and Weather Alert Icon to indicate that the Weather Alert is active. GPS COORDINATE SYSTEM TRUE/MAGNETIC SBAS GPS STATUS SPEED MEASUREMENT COURSE UP/NORTH UP EXIT ENTER GPS Menu All VHF Marine radios SHOULD / NEED to have a GPS receiver connected and operating to effectively use the DSC (Digital Selective Calling) features built-in to the radios. In an Emergency you want the rescue authorities and surrounding vessels to know where you are and to be able to quickly assist you in your time of need. Your MR HH600 handheld VHF radio has a GPS receiver built right in! This menu allows you to select and allows you to test the GPS receiver to be sure that you are receiving good satellite information and check the GPS signal strength. 22 English VOHpFerMatainrigneYoRuardRioaPdirootocols Intro Operation Menu Soft Key Setup Mode Programming Customer Warranty CAsosisotanrcedinate System The Coordinate System allows adjusting to your navigating preference. The most common is already selected. Installation Channel Up/Down Buttons Secondary Icons Customer TAossiSstaenlceect the Coordinate System: 1. Enter the Settings menu and scroll to GPS MENU with the Up/Down soft keys or the Up/Down channel buttons. 2. Highlight the COORDINATE SYSTEM option in the menu. Notice 3.CaPutiroen ss the WEaNrnTingER key and observe the current setting. GPS 4. Use the Up/Down soft keys or the UP/Down channel CTRO UOER/DMIANGANTEETSIY CSTEM buttons to change the setting to use the desired SB AS coordinate system. GPS STATUS SP EED MEASUREMENT 5. Press the ENTER soft key to select the setting. Or press the CO URSE UP/NO RTH UP EXIT soft key to EXIT without making changes to the EXIT ENTER Coordinate System setting. 6. The radio will return to the GPS menu. The radio will remember the saved Coordinate System setting when powering off the radio. Menu Soft Key Channel Up/Down Buttons True or Magnetic System Select TRUE or MAGNETIC to change if bearings are shown as relative to either true or magnetic north. If MAGNETIC is selected then the variation is computed and displayed automatically for every zone. To Select True or Magnetic System: 1. Enter the Settings menu and scroll to GPS with the Up/Down soft keys or the Up/Down channel buttons. 2. Highlight the TRUE/MAGNETIC option in the menu. TRUE/MAGNETIC 3. Press the ENTER key and observe the current setting. TRU E 4. Use the Up/Down soft keys or the Up/Down channel MAG NETIC buttons to select the desired setting. 5. Press the ENTER soft key to select the setting. Or press the EXIT soft key to EXIT without making any changes to the True EX IT ENT ER or Magnetic setting. 6. The radio will return to the GPS menu. The radio will remember the True or Magnetic setting when powering off the radio. Nothing Comes Close to a Cobra® 23