Cobra RAD 350 RAD 350 - Page 4

Your Detector Installation Installation Intro Operation Customer Assistance Warranty • Where to Mount Your Unit You will get optimum performance from your detector if you Mount it at a point approximately in the center of the vehicle, as low as possible on the front windshield Secondary Icons without obstructing the unit's view of the road either to the front or rear. You can also mount it directly on the dashboard. Windshield Mounting Dashboard Mounting Notice Your Detector Installation Intro Operation Customer Windshield MouAnssitstianncge Warranty Secondary Icons 1. Attach the rubber cups to the bracket. 2. Make sure the rubber cups and your windshield are clean. Notice 3. P ush the bracket firmly onto the windshield. The unit's lens must not be blocked and the LaserEye should have a clear view out the back window to allow maximum detection. The LaserEye Should Have a Clear View Radar and laser signals pass through glass but not through other materials and objects. Objects that can block or weaken incoming signals include: n Windshield wiper blades n Mirrored sun screens n Dark tinting at the top of the windshield n Heated windshields currently available on some vehicles (Instaclear for Ford, Electriclear for GM). Consult your dealer to see if you have this option. 2 English 4. A ttach the detector to the bracket. Check that the unit is parallel to the road's surface. 5. To adjust the angle if necessary, gently push or pull on the bracket to bend it. DO NOT use the detector to bend the bracket. 6. Plug the power cord into the detector. 7. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. Nothing Comes Close to a Cobra® 3