Cobra RAD 350 RAD 350 - Page 6

Your Detector Settings Settings Intro Operation Customer Assistance Warranty • Sens Mode Setting your detector to City mode sensitivity delays all X band audio alerts at lower Secondary Icons signal strength levels. (A single beep will sound when the signal is first detected.) This will reduce false alerts while you are driving in, or near, urban areas where there are many sources for conflicting X band signals such as microwave towers and automatic door openers. To change settings, follow the procedure listed below, which indicates what you will see and heNaotriceas you complete each step. The factory setting is Highway mode. Highway Mode h X K Ka V SEN Button Press and release City Mode X K Ka V c To Change From Highway Mode To City Mode Press and release the SEN button. Audible Tone One beep Visual Display c appears in the display To Change From City Mode To Highway Mode Press and release the SEN button again. Audible Tone Two beeps Visual Display h appears in the display 6 English Your Detector Settings Anti-Falsing Circuitry Intro Operation Customer Assistance Warranty Your RAD 350 is designed to provide you the truest alerts and minimize the distraction of erroneous signals from radar-based fixed-position and moving sources. • Adjustable Sensitivity: City / Highway modes allow driver to adjust sensitivity Secondary toIcons driving environment, reducing false alarms from fixed position sources such as automatic door openers. • IVT Filter: system automatically reduces false alerts from moving In-Vehicle Technology sources such as collision avoidance systems and adaptive cruise control. Notice Manual Mute Your detector allows you to quickly turn Off an audio Alert by momentarily pressing the Mute button. If you press the Mute button a second time during the Alert, the audio Alert will be turned back On. Auto Mute will automatically reduce the audio volume of all alerts after four seconds for as long as the signal is detected. The factory setting for Auto Mute is On. Mute Button Press and release To Turn Auto Mute Off Press and release the Mute button while no alert is occurring. Audible Tone One beep To Turn Auto Mute On Press and release the Mute button again while no alert is occurring. Audible Tone Two beeps Visual Display Audio Only Visual Display Audio Only Nothing Comes Close to a Cobra® 7