Cobra XRS 9445 XRS9445_MANL - Page 10

Your Detector Settings Intro Operation Customer Warranty Radar Alert SAsseistatntceings The detector allows you to choose whether it will show alerts on the X, K and Ku bands. The factory settings are: X Band and K Band On; Ku Band Off. To Turn X Band On and Off Secondary Icons While no signal is Tone being detected, press and hold both the X On = Two beeps Dim and Mute buttons for four X Off = One beep seconds. Notice To Turn K Band On and Off While no signal is being detected, press and hold both the Mute and City buttons for four seconds. Tone K On = Two beeps K Off = One beep To Turn Ku Band* On and Off While no signal is being detected, press and hold the City button for four seconds. Tone Ku On = Two beeps Ku Off = One beep Voice X On X Off Voice K On K Off Voice Ku On Ku Off Visual Display X will blink twice in the display X will blink once in the display Visual Display K will blink twice in the display K will blink once in the display Visual Display X and K will blink twice in the display X and K will blink once in the display Pop Alert The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses a single, short-time pulse to measure the target vehicle's speed. The Pop mode receiver senses Pop singles beyond the effective range of Pop radar guns. As the Pop mode receiver is so sensitive, you should limit the use of Pop Detect mode to highway and rural driving. Pop Alert will alert you to Pop radar signals. During the alert, the unit continues to detect other signals. The factory setting is Pop Detect Off. 14 English Settings and Detection Your Detector Intro Operation Customer Warranty Pop Alert (conAtsisnistuaneced) To Turn Pop Alert On and Off While no signal is being Secondary Icons detected, press and hold both the Dim and City buttons for four seconds. Tone Voice Pop On = Two beeps Pop On Pop Off = One beep Pop Off Visual Display P will blink twice in the display P will blink once in the display Notice Detection • Signals Detected The tables on the following pages show you the types of Signals your detector will detect, as well as the voice and visual alerts it provides for each of them. Audio Alerts In Voice Alert mode you will first hear several tones, then a voice message announcing the type of signal detected, followed by more tones. In Tone Alert mode, you will hear the tones only. In both Voice Alert and Tone Alert modes, a distinctly different alert tone is used for each type of signal detected (including separate tones for each laser signal). For X, K, Ka and Ku band radar signals, the tones will repeat faster as you approach the signal source. The repeat rate of the tones gives you useful information about the signal detected. (See responding to alerts on page 18.) Visual Display An indication of the type of signal detected will appear in the UltraBright data Display. During X, K, Ka and Ku alerts, a number will also appear, indicating the strength of the signal detected. (1 = weakest, 5 = strongest) X Signal Detected K Signal Detected Ka Signal Detected Ku Signal Detected 2 X K Ka V S 3 X K Ka V S 5 X K Ka V S 4 X K Ka V S Nothing Comes Close to a Cobra® 15